This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. For safe handling information on this product, consult the Safety Data Sheet (SDS):
Directions for use:
1) This product is light sensitive; exposure to daylight, UV light and artificial light should be kept to a minimum during storage and handling.
2) For best performance bond surfaces should be clean and free from grease.
3) This product performs best in thin bond gaps (0.05 mm)
4) Excess adhesive can be dissolved with nitromethane or acetone.
Storage:
Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling.
Optimal storage: 2 ºC to 8 ºC. Storage below 2 ºC or greater than 8 ºC can adversely affect product properties. Material removed from containers may be contaminated during use. Do not return product to the original container. Cartell Chemical Co., Ltd. cannot assume responsibility for a product which has been contaminated or stored under conditions other than those previously indicated.
Conversions:
(ºC x 1.8) + 32 = ºF
kV/mm x 25.4 = V/mil
mm / 25.4 = in
μm / 25.4 = mil
N x 0.225 = lb
N/mm x 5.71 = lb/in
N/mm2 x 145 = psi
MPa x 145 = psi
N·m x 8.851 = lb·in
N·mm x 0.142 = oz·in
mPa·s = cP
Storage & Handling precaution
Keep adhesive in a cool and dry place. The storage temperature is recommended at 2 °C - 8 °C. For details, consult the Material Safety Data Sheet, (MSDS). Shelf life is twelve months from the date of manufacture in the original container under the optimal conditions.
1. Avoid contact with skin and eyes.
2. If contact with skin, rinse with water.
3. If adhesive gets into eye, keep eye open and rinse with water thoroughly. Seek medical attention immediately.
4. Keep the material out of children’s reach.
