Permabond ET5164 Epoxy Food Grade

This product is not recommended for use in contact with 
strong oxidizing materials.
Information regarding the safe handling of this material 
may be obtained from the safety data sheet.
Users are reminded that all materials, whether innocuous 
or not, should be handled in accordance with the 
principles of good industrial hygiene.
This Technical Datasheet (TDS) offers guideline 
information and does not constitute a specification.

Directions for Use
1. Dual cartridges:
a) Insert the cartridge into the application gun and 
guide the plunger into the cartridge.
b) Remove the cartridge cap and dispense material 
until both sides are flowing.
c) Attach the static mixer to the end of the cartridge 
and begin dispensing the material.
2. Apply material to one of the substrates.
3. Join the parts. Parts must be joined within the usable 
pot life of mixing the two epoxy components.
4. Large quantities and/or higher temperature will 
decrease the usable life or pot life.
5. Apply pressure to the assembly by clamping until 
handling strength is obtained.
6. Full cure will be obtained after 24 hours at 23°C (74°F). 
Heat can be used to accelerate the curing process.

Storage Temperature 5 to 25°C (41 to 77°F)